Ksp bdarmory гайд

Обновлено: 06.07.2024

Setting up an air battle between AI controlled units is one of many fun things you can do with BDArmory, and there are many ways to go about it. This tutorial, aimed at newcomers, will detail one way this can be done in a few simple steps.

Contents

1: Designing the planes [ ]


Hey, if it works, it works!

The first step is designing the planes which will take part in the battle, meeting a few key requirements. First of all, they will obviously need to be airworthy. If you're having serious issues flying them yourself, the AI might not fare much better, so aim for a good mix of stability and maneuverability. Additionally, they have to be capable of taking off from a slightly bumpy surface, because as we will see, the KSP runway will be unavailable when it's time for take-off.

2: Setting up for take-off [ ]


Using the HyperEdit Ship Lander tool can be very helpful in positioning planes for takeoff.

Once you have one or more aircraft designs ready, you can move on towards setting up the battle itself. As KSP will not let you put more than one plane at the runway itself, the first thing you need to do is position the participants somewhere off the runway. The grass next to it usually works well, so simply go to launch, and let your plane roll gently down from the runway and onto the field. You can also use a tool like Hyperedit or vesselmover to easily "land" your planes in a good position.

Once positioned in a take-off-friendly spot, turn on the brakes, and right-click the AI Pilot Flight Computer. Make sure Standby Mode is on, activate the pilot, and then turn on the engines if you haven't already done so. The AI is now active and in full control of the airplane; and waiting for the command to launch. Finally, open up Guard Mode from the Weapon Manager menu, and enable it. Binding these functions to toggle on the Stage action group saves much time, menu browsing and clicking.

Tip: Using the optional BDA Vessel Switcher can make the process easier, as it will let you toggle AI Pilot and Guard Mode on all nearby vessels, as well as switching between them.

Leaving the plane in place, return to the Space Center, and repeat the process – go to launch, put the second plane in a take-off-friendly spot, and engage the AI Pilot and engines while Standby and Guard Mode is on. You can repeat this process as many times as you want planes in the battle; just make sure their take-off paths don't intersect.

3: Starting the battle [ ]

Note: Much of this section has been simplified by Bahamuto D's BDA Vessel Switcher and Competition Mode.


While taking off, you can cycle through the units and switch their teams.

To get more than one AI-controlled plane in the air at the same time, you're going to be using the Wing Command module. Simply open up the Wing Command menu and select all units. Make sure you also check the "Command Self" box.

Next, click the Take Off button, and you should see all the planes you have positioned rev up their engines and start off down their various paths.

While the planes are speeding down their respective "runways", you can start cycling through all active ships (default button: "]"). This will let you designate which team each plane belongs to. If all planes are on Team A by default, switching half of them to Team B while they're taking off should lead to an interesting battle shortly after.

Alternately, you can wait until all planes are in the air, and use the Wing Command options to separate two groups of planes before (very rapidly) cycling through the members of one group and changing their team. You will only have a few seconds before the other members of the group start shooting at "newfound enemies", though, so you will need to act quickly.

In the settings menu, a Peace mode allows positioning of different teams within Guard range without setting off a battle before you are ready.

4: Finishing words [ ]

Using these steps you should be able to easily set up your first autonomous air battle. Moving on from here you can make it almost as advanced as you like; from placing enemies in standby mode on the Island Runway to adding SAM-sites, cruise missiles, ground vehicles or even combat ships to the mix. Mods like Hyperedit, VesselMover and Kerbal Konstructs/Kerbinside make this quicker and easier to do.

Note that physics range quickly becomes a limitation when planes begin a significant distance apart. Use the BD settings menu to increase it from the default 5000m, and when launching try not to be focused on an object more than about 6km from any of the planes, as calculating errors can cause it to crash into the terrain on take-off. Once they're in the air, as long as you're within physics range, they should be fine.


The GPS Coordinator is where GPS targets are listed. It can be accessed via the modules tab in the Weapon Manager.

Currently, the GPS target database can only receive coordinates from targeting pods like the FLIR Targeting Ball or AN/AAQ-28 Targeting Pod.

Once a target coordinate is sent to the GPS database, it is shared between members of the same team, and the target's position in the world will be marked with a small green dot.

The GPS Coordinator window contains the following two sections:

Active Target [ ]

The area at the top shows the name and coordinates of the currently selected GPS target, if any. The position of the target is also marked with a green dot with crosshairs on its world position.

GPS guided weapons can home in on the active target. The X on the right deletes the current target.

Target List [ ]

Below the currently selected target is the GPS target database. Targets in the database can be renamed by clicking their current name, using the button on the left.

To mark a target as active, click on the coordinates in the middle. The X to the right of each entry removes it from the GPS target database.


Добрый день. у меня маленький вопрос

Видел на видео как игрок активирует турель потом перекл. на самолёт
пролетает в радиусе и турелька начинает гасить по самолёту.

Кто может подсказать какие параметры выставлять в настройках турели или ракеты.
перепробовал всё потратил 2 часа времени и без результата(((
буду благодарен.
[attachment=15241]


В вопрос ответ А так, просто поменяй команды крафтов и на одном из них включи гуард мод.

Я освещаю все и вся! ©


Foton-X, пробовал (включение кнопка ARMED) вроде так тыкал


Petrenko_Evgenij, пкм на маячок определяющий команду
там сменяешь ее

Новое видео в жанре воздушных сражений , надеюсь вам понравиться

Реплика | General Dynamics F-16 Fighting Falcon

Реплика | General Dynamics F-16 Fighting Falcon

Дженерал Дайнэмикс F-16 «Файтинг Фалкон» — американский многофункциональный лёгкий истребитель четвёртого поколения представленный в стоковом виде.

Новость отредактировал: The_Petrovich - 1 мар 2016 в 09:42
Причина: Лишние символы

НЛО Легкий разведчик

НЛО Легкий разведчик

Реплика UFO Light scout из игры Xenonauts

Самолет Thunderbolt II

Самолет Thunderbolt II


Самолет A-10 "Thunderbolt" II для уничтожения танков. Нужен мод BDArmory.

Новость отредактировал: Grage - 27 мар 2015 в 19:43
Причина: Добавление картинки в краткую новость

Привет!

Последние комментарии


Тяжелый транспортный VTOL Breeze Mk.2

На дату посмотрите

Тяжелый транспортный VTOL Breeze Mk.2

Так уже вышел последний релиз 1.12

Eldor СВВП V.1

Свят Свят изыди сатана из твоего КСЦ


Незаслуженно забытый? Stearwing D45

Так в посте прикреплён же, или с файлом проблема?

Лейтианские хроники. Колония.

А япошки? И религия и развиты.

Все комментарии..

Полный список последних комментариев





Нашли ошибку?
Вы можете сообщить об этом администрации.
Выделив текст нажмите Alt+Ctrl

Читайте также: