Как настроить logitech momo racing в assetto corsa

Обновлено: 18.05.2024

28 окт. 2018 в 0:29

Steam client is making a regal mess of handling steering wheels because of two year old Steam Input bugs. Valve refuse to acknowledge how bad steering wheels are supported in Steam client and Steam Input in 2018.

Game devs just tell folks to switch Steam Input off, but in recent months things have become so bad with steering wheels I can no longer directly use Steam to launch Assetto Corsa. If I launch game from Big Picture and use Steam Overlay it is obvious there are many bugs causing issues with steering wheels, the Rearrange Controller Order menus proves Steam Input can not detect steering wheel or even Xbox type controllers properly.

Steam large mode used to be a great way to workaround the Steam Input bugs in Big Picture (for years) but today Assetto Corsa refuses to use steering wheels, because Steam client and Steam Input is riddled with game breaking bugs.

Since I now need to launch my steam games from GeForce Experience for steering wheels to work, I refuse to buy any more driving games from steam store. Absolutely shockingly bad situation.

This is relative to all steering wheels and not just Logitech

It is obvious not one single Valve dev uses a steering wheel and pedals for driving sims/games.

Kunos never did fix ui in Assetto Corsa, and I refuse too buy ACC until they provide a better optimised ui for using steering wheel only. Having to reach for KB + m in 21st century is not needed or wanted.

So Valve can help and Kunos can help.

28 окт. 2018 в 4:18

This is relative to all steering wheels and not just Logitech

It is obvious not one single Valve dev uses a steering wheel and pedals for driving sims/games.

Kunos never did fix ui in Assetto Corsa, and I refuse too buy ACC until they provide a better optimised ui for using steering wheel only. Having to reach for KB + m in 21st century is not needed or wanted.

Your comment about problems with all wheels is wrong. My Thrustmaster wheel has worked with all of the Steam driving games I've tried it with without any special launch sequences (as did my previous Logitech wheel). I just start them with the icon on my desktop so I'm not sure what your problem is.

As for the UI, have you actually tried ACC? I do most things in the UI from my wheel.

Как настроить logitech momo racing в assetto corsa

5 янв. 2014 в 11:07

Anybody here who know's the best settings for this ol'wheel? Or best settings in general. I'm more fan of using the 360pad, but since i read everywhere that wheel is the real deal. So = )

Thanks in advance!

5 янв. 2014 в 11:56

I'm using one (until I receive my new one: T500 RS+ shifter) and it is quite dated I think.
270° of rotation only and ♥♥♥♥♥♥ pedals (no clutch).
The force feedback is pretty good though and it is robust (I have mine since 2006)

Best setting: I don't know really. Should be like any other wheel in term of what effects you should put to 0% but other than that it is too simple a wheel to even bother I think.

8 янв. 2014 в 11:35

I own a MOMO too, had to repair it a few times (especially the potis in the plastic pedal set wear down after all those years) but it is still doing a quite good job in AC. Its main flaws are the limited turn angle, the missing clutch and the dated mechanisms.

Here are my settings wich work pretty good with all cars without changing them on each occasion:

Logitech Profiler: FF 100%; Dampening and Spring 0 %; enable that game may change settings

Ingame: FF 65%; Filter and Dampening 0%
Kerb 75%, Road 65 %, Slide 35%
Wheel Gamma 1.3 (makes the virtual wheel turrn more progessive on higher angles while still beeing able to make small adjustments around the center), Filter and Speed sensitive Steering 0%. Not really wheel related but what also helps the imersion is to decrease the FOV (i have mine at 45 - 50°, but that is for a 19" screen) and get the Monitor as close as possible behind the wheel. Might take some time to adjust to the new settings but when u are stuck with that wheel its well worth it, and better than a gamepad in any case.

Hope that helps a bit.

9 янв. 2014 в 9:16

Thank you very much friend. I'm using this wheel until i can decide what other racing wheel suits me best. The MOMO does the job quit well, but as you say the turning radius aren't quite that good. But hey! Still does the job and it's way better then using a pad.

9 янв. 2014 в 10:48 9 янв. 2014 в 12:00

I got one this week and I need to relearn to drive entirely with it. Which is fun sort of.
I have a driving license for years but I never drove beyond that (no need where I live) and having to deal with the clutch and 3 turn of rotation is very confusing :)

I feel that the space between the pedal is a bit to much though.

9 фев. 2015 в 14:50

I own a MOMO too, had to repair it a few times (especially the potis in the plastic pedal set wear down after all those years) but it is still doing a quite good job in AC. Its main flaws are the limited turn angle, the missing clutch and the dated mechanisms.

Here are my settings wich work pretty good with all cars without changing them on each occasion:

Logitech Profiler: FF 100%; Dampening and Spring 0 %; enable that game may change settings

Ingame: FF 65%; Filter and Dampening 0%
Kerb 75%, Road 65 %, Slide 35%
Wheel Gamma 1.3 (makes the virtual wheel turrn more progessive on higher angles while still beeing able to make small adjustments around the center), Filter and Speed sensitive Steering 0%. Not really wheel related but what also helps the imersion is to decrease the FOV (i have mine at 45 - 50°, but that is for a 19" screen) and get the Monitor as close as possible behind the wheel. Might take some time to adjust to the new settings but when u are stuck with that wheel its well worth it, and better than a gamepad in any case.

Как настроить logitech momo racing в assetto corsa

Виктор Ролдугин

Расскажу все-таки про настройку руля. Не зря же я два дня убил на это.
Есть несколько твиков, которые работают на всех рулях. Итак:

Этот параметр определяет число кадров просчитанных наперед. Чем больше кадров просчитано наперед, тем возможней рассинхронизация картинки и того, что происходит с рулем на самом деле.
MAXIMUM_FRAME_LATENCY=1 - будет готовиться только один кадр наперед
MAXIMUM_FRAME_LATENCY=0 - будет готовиться столько кадров, сколько настроено в драйверах видеокарты ( обычно три-четыре кадра )

Твик спорный. Кто-то заново открывает для себя фидбек, кто-то не чувствует разницы. В любом случае, хуже от него точно не будет. Однако, его использование может отразиться на фпс, но я не заметил.

Виктор Ролдугин

Движок корсы может работать с ффб на частоте 300Hz, что ниже поддерживаемой частоты всех современных рулей ( G25 и выше ). Этот параметр уменьшает частоту фидбека. Сделано это для совместимости с ущербными рулями, но по умолчанию зачем-то включено.
FF_SKIP_STEPS=1 - 150Hz
FF_SKIP_STEPS=0 - 300Hz

Самый мастхэвный твик.

Виктор Ролдугин

Самый значительный твик, который принципиально меняет фидбек.
В этом файле приходится выбирать один из двух твиков: LUT или GAMMA.

Первый дает полностью линейный фидбек. Что это значит? То что и на прямой, и в повороте усилие на руле одинаковое. Снимается график с руля и с помощью LUT Generator строится LUT-файл, который компенсирует нелинейность фидбека. Подробно рассказывать не буду. Информации в сети очень много, в том числе на русском языке. Если вы используете LUT, то нужно изменить следующие строки:

TYPE=LUT ( по умолчанию GAMMA )
ENABLED=1 ( по умолчанию 0 )
CURVE=название_вашего_файла.lut

Второй тоже меняет линейность, но не произвольным образом, а гамма-коррекцией, с помощью математической функции. Значения <1 усиливают слабые силы, а >1 сильные силы. Например, если усилие на руле на прямой слишком слабое, а в повороте слишком сильное, то сделав гамму меньше единицы вы сделаете усилие на прямой больше и разница будет не такой ощутимой. Рекомендую постепенно понижать гамму шагом 0.1 или даже 0.05. Если вы используете GAMMA, то нужно изменить следующие строки:

TYPE=GAMMA ( по умолчанию GAMMA )
ENABLED=1 ( по умолчанию 0 )
VALUE=x.x

Лут мне не понравился ( очень не привычно ), а гамму я использовал, со значением 0.8. Сейчас не пользуюсь ни тем, ни другим. Нужно понимать, что лут очень мощное средство.

Как настроить logitech momo racing в assetto corsa

Assetto Corsa Competizione | G Challenge

Assetto Corsa Competizione | G Challenge

Assetto Corsa Competizione | G Challenge запись закреплена

Настройка рулей Logitech G25/27/DFGT для Assetto Corsa.

Настройка рулей Logitech G25/27/DFGT для Assetto Corsa. Гайд для НОВИЧКОВ.

Евгений Прозоров


Евгений Прозоров

Что с тормозами в этой игре? Чуть нажмёшь - машину уносит нах. Не реалистично, играть невозможно

DELETED

Евгений Прозоров


Евгений Прозоров ответил DELETED

Сергей, тогда это говно будет тормозить километр. Пробовал уже , не вариант, увы

выбери жизнь

Саша Островский

Вячеслав Иноходов

Евгений, в начале гонки нажми педаль до упора. У меня пока так не сделать, игра считает любое прикосновение к педали - нажатием "в пол"

Евгений Прозоров


Евгений Прозоров ответил Вячеславу

Евгений Прозоров


Евгений Прозоров ответил Сообществу

Максим Гончаров

Костя Рисуев


Костя Рисуев

DELETED

Максим, Макс дело говорит. А еще баланс настраивай для твина важная штука помогает часто очень.

Максим Гончаров

Ну хоть что-то в дрифтер да я понимаю, ещё бы ездить нормально.

DELETED

Максим Гончаров

Сергей, так регулярно катаюсь в корсе но той стабильности и близости не как не могу добиться

DELETED

Максим, просто катать это одно дело, нужно всегда анализировать свои действия. Стараться понять почему то или иное не получается. Думать как сделать так что бы получалось. В этом лично мне помогают видяхи с FD,D1GP. + Общение со "старичками" а точнее обсуждение техник дрифта. Одна голова хорошо а 2 лучше. Еще я раньше изучал устройство автомобиля это дает свои + понимания к приму работы подвески а не просто увеличить или уменьшить развал. Еще естессно библия дрифта ( но это и так понятно ) Я пропустил года 2 просто так катаясь, ради фана, думая я все умею. НИХЕРАШЕНЬКИ. Сейчас евери заезд всегда после просматриваю реплеи и анализирую свои ошибки.

Читайте также: