Wall control как пользоваться

Обновлено: 15.05.2024

Wall Control-red displays the desktop of the machine that is being controlled. It allows you to remotely display Vision, IPCamera and application windows across a network on another machine or locally on the same machine.

You can use Wall Control-red to interactively move, size and position application windows and control Vision and IP-Camera windows by using the Windows Properties sheet. Wall Control-red also has a guide and grid function to aid the positioning of windows.

Wall Control-red allows you to save specific wall layouts as .lay files enabling them to be re-called when required.

Wall Control-red also allows you to save Vision windows as templates called presets. New instances of the saved preset windows can be created in subsequent layouts. Presets can also be used with the split windows functionality , this allows you to divide a Vision window into a set of sub-windows, each displaying a cropped portion of the image in the original window.

There is an area of the application around the desktop where windows can be dragged allowing them to be manipulated without being displayed on the video wall.

Icons Displayed in the Wall Control-red Application Toolbar

The Icons displayed in the application toolbar identify which type of source is available to each input:


= Composite source


= S-Video source


= Analog source


= Component source


= DVI source


= Dual-Link DVI source


= SDI/HD-SDI/3G source


= IP Camera source


If an icon has a green surround this indicates the type of source currently being captured for that particular input.

Installation

Wall Control-red consists of two separate elements that work together to enable you to control the display wall, the Wall Control-red Application and the Wall Control-red Server.

Wall Control-red Application

The Wall Control-red Application should be installed on the machine that has been identified to control the display wall. This could be any machine on the network including the machine driving the display wall. The application element of Wall Control-red is used to control the position, size and properties of each window displayed on the Server machine.

Wall Control-red Server

The Wall Control-red Server is used to display Vision and application windows. The Server element of Wall Control-red needs to be installed on the machine from which you wish to create Vision and application windows.

If you are using the Wall Control-red hardware key for the first time, it should not be inserted into your USB port until the installation of the application is complete. The operating systemwill not recognise the device and will allocate a generic driver.

To install Wall Control-red, browse and locate the INSTALL.EXE , double click on the install icon and the installation wizard will be activated.

The first dialogue displays details of compatible operating systems. Click N ext> to continue and the Licence Agreement dialogue is displayed. To proceed with the application installation the terms of the License Agreement must be accepted by clicking on the acceptance box.

Once the Licence Agreement has been accepted click N ext>.


Note:

If you are using the Wall Control-red hardware key for the first time, it should not be inserted into your USB port before you get to this stage of the installation. The operating systemwill not recognise the device and will allocate it a generic driver.

The hardware key must remain in the USB port after installation otherwise the advanced Wall Control-red features will not function.

Wall Control-red will, by default, be installed in Program Files; the Destination dialogue can be used to select a different location for installation by clicking on Browse… Once the required location has been selected Click N ext> to continue.

The next dialogue displays the name of the folder where the Wall Control-red application shortcuts will be created. The name of the folder can be changed to suit requirements. Click N ext> to continue to the Application/Server dialogue.

The Application/Server dialogue enables you to select which elements of Wall Control-red are installed on a particular machine.

Wall Control-red Server

The Wall Control-red Server is used to display Vision and application windows. It should be installed on the machine that contains the relevant hardware.

Wall Control-red Application

The Wall Control-red Application is used to control the position, size and properties of each window displayed on the Wall Control-red Server machine. The Wall Control-red Application should be installed on the machine you wish to use to control the display. This could be any machine on the network or the same machine as the Wall Control-red Server. Click N ext> to continue to the Components dialogue.

Use the Components dialogue to select which components of Wall Control-red you wish to install. Click N ext> to continue to the Install dialogue.

The Install dialogue displays a summary of the options you have selected during installation. If you wish to change any of the options, use the < B ack button and locate the option you wish to change. Once the correct options have been selected, click N ext> to install Wall Control-red.

Wall Control-red has now been installed; Click F inish and a prompt to reboot your machine will be displayed.

WallControl 10
Pro

WallControl 10 Pro edition has been designed for companies with larger scale video wall operations. It is ideal for installations, which have multiple video walls, which require a greater number of IP decode streams, or would like distinct levels of access to the video wall.

  1. MultiWall – Multiple walls can be viewed on a single WallControl 10 interface or screen. Users are able to add and remove content as necessary.
  2. User Rights Management – Users can be assigned access rights on a per wall basis. Individual roles can be granted differing permissions to affect the changes that can be made to a given wall.
  3. Unlimited IP SQX sources – Decode as many IP SQX streams as the installed hardware will allow.
  4. Banners - Create banners with text or RSS feed content to scroll across the video wall.
  5. Asset Management - Users can create and store On-Screen Display, carousel and border settings in the Asset Manager for re-use in different layouts across multiple video walls.
  6. Vision Streaming - WallControl 10 Pro users can now stream captured Vision sources over the local network to a Datapath ActiveSQX card or any standard RTSP decoding software (such as VLC) for remote monitoring, processing or recording.

Key Features

Сканер проводки Wall CONDTROL

Просмотр в 3D

Сканер проводки Wall CONDTROL имеет следующие режимы работы:
— поиск деревянных конструкций на глубине до 20 мм;
— поиск медных труб на глубине до 40 мм;
— поиск чёрных металлов на глубине до 50 мм;
— поиск проводки под напряжением на глубине до 50 мм.
Все режимы отображаются на жидкокристаллическом дисплее в виде специальных символов. При обнаружении скрытых конструкций и металла устройство издаёт звуковой сигнал, а на экране появляется соответствующая индикация.


Web Interface

The WallControl 10 Web Interface allows users to connect to the video wall from any compatible browser on laptops, phones and tablet devices.

Users can select which wall they wish to change and then will be presented with the available layouts. They can use the ‘Snapshot’ feature to receive an image of what is being displayed on the wall.

WallControl 10
Standard

WallControl 10 software provides users with the interface needed to quickly and effectively manage video walls of any size in real-time.

  1. Create templates and produce zones on your video wall for easy placement of content.
  2. Deploy templates over a single screen, multiple screens or an entire video wall.
  3. Template a window to group multiple pieces of content together.
  4. Select and crop particular areas of interest from a snapshot of your source and deploy them to the video wall.
  5. Decode up to 8 IP streams.
  6. Manipulate sources with full keyboard and mouse functionality (KVM).
  7. Place text over windows to name and identify video wall sources quickly.
  8. Use borders and frames to surround content with a chosen colour to group source types or prioritise content.
  9. Add On-Screen Display (OSD) text with borders and frames to identify, group and prioritise sources.

Визуализация скрытых коммуникаций

Когда прибор находит скрытый объект, он формирует световой луч, по которому можно определить трассу инженерной коммуникации или ось конструкции.

WallControl 10

Image is not available

Available on Datapath's VSN and iolite range of video wall controllers, WallControl 10 allows users to easily control output sources such as IP feeds, video captures and local applications. These sources can be controlled by WallControl 10 when the most elaborate and complex wall scenarios are required.

Available in both standard and Pro versions


WallControl 10 от Datapath: Интуитивный интерфейс, управление доступом и комплексные возможности

WallControl 10 от Datapath: Интуитивный интерфейс, управление доступом и комплексные возможности


Стандартная версия WallControl 10 обеспечивает превосходные возможности для управления одной видеостеной.

В пакет включены:

  • Функционал перетаскивания указателем
  • Интуитивно понятный дизайн платформы
  • Пользовательские настройки
  • Мгновенное передвижение для быстрых развлекательных проектов
  • Возможность комбинировать контент
  • Поддержка формата PDF
  • Возможность добавления запаса времени в видео-контент (например, + 10 сек. к началу)
  • Простой в применении редактор шаблонов (с возможностью создания сложных конфигураций)

WallControl 10 Pro даёт пользователям все преимущества стандартной версии, а также доступ к управлению несколькими стенами и правами пользователей.

Эргономичный дизайн

По бокам корпуса предусмотрены резиновые вставки, чтобы устройство надёжно фиксировалось в руке. Удобное расположение кнопок и понятная индикация обеспечивают максимальную простоту в использовании Wall CONDTROL. Экономить зарядку батарей помогает функция автоматического выключения, которая срабатывает через 60 секунд с момента последнего действия.

Сканер Wall CONDTROL рекомендуется использовать всем, чья работа связана со строительством и ремонтом, а также сотрудникам ЖКХ и домашним мастерам. Детектор скрытых коммуникаций пригодится при монтаже любого декора, мебели, кондиционеров, сигнализаций. Необходимо взять за правило каждый раз перед сверлением проверять стены и полы при помощи прибора. Те, кто пренебрегают этим принципом, рискуют повредить существующие коммуникации, это, в свою очередь, может повлечь за собой материальный ущерб и причинить вред здоровью.



● 4 режима работы и быстрая калибровка;
● простой в эксплуатации;
● не только сканирует, но и визуализирует скрытые инженерные коммуникации.

Сканер проводки Wall CONDTROL – простой и понятный в управлении прибор, который станет надёжным помощником при проведении ремонтных работ и поможет избежать непредвиденных ситуаций, связанных с повреждением электрокабелей и других инженерных коммуникаций.

Быстрая калибровка

Для корректной работы прибора необходимо перед применением сделать калибровку. Достаточно приложить прибор к поверхности, нажать кнопку калибровки и подождать, когда прибор раздаст тройной звуковой сигнал. По времени это займет не больше 3 секунд.

Читайте также: