Почему не открывается консоль в ведьмак 3

Обновлено: 05.07.2024

10 ноя. 2018 в 10:54

I've changed the General.ini file and deleted the dssound.dll file and yet pressing F2 or the tilde key does nothing.

Have I done something wrong? I just want to fight 50 bears at once in the my complete bear school set

Ok so for future reference weather you are running windows 10 or 7 you need to edit two files not just one.

First, open the "general.ini" file located under
C:\Program Files (x86)\Steam\steamapps\common\The Witcher 3\bin\config (if you have your steam library in the default location), otherwise just right click on the game in your steam library UI and hit properties and go to the local files tab and click brows locals files and go from there.

put these two lines in under [General]
ConfigVersion=2
DBGConsoleOn=true

THEN you need to go to C:\Users\(your user folder)\Documents and open the "user.settings" file located there and look for the [General] line and add the same two lines under it if they are not already there and you will have a functioning console without adding a mod that can possibly interfere with other mods.

I hope this helps other people that have run into my issue where the console doesn't work after just editing the general.ini file.

10 ноя. 2018 в 11:11

The Witcher 3 Wild Hunt\bin\config\base directory

open the General.ini file and copy-paste the following under the [General] line :

Save the file and you're done.

10 ноя. 2018 в 12:21

The Witcher 3 Wild Hunt\bin\config\base directory

open the General.ini file and copy-paste the following under the [General] line :

Save the file and you're done.


I did exactly this, and the console does not show up 10 ноя. 2018 в 12:27 10 ноя. 2018 в 13:58 10 ноя. 2018 в 14:05 That's. really weird then. Don't know what to say except that it works for me, sorry. 10 ноя. 2018 в 15:13 Pretty sure you need a mod to enable it. Though idk if it's true but I installed one and did the edit in the .ini file and can open the console. 10 ноя. 2018 в 15:21 You don't need a mod for the console, the mod is for the free camera and it doesn't work for 1.32 currently. 10 ноя. 2018 в 15:36 10 ноя. 2018 в 15:38 10 ноя. 2018 в 16:54 Literally the wrong key. I thought it was the tilde (

), meanwhile it was just ( ` ) instead.

10 ноя. 2018 в 18:33

That's weird - on mine it's the tilde key. But ya, I had issues with this - I had been using the file placement mod to enable it, so I just uninstalled that and put the one-liner into general.ini like the guy above mentioned and that fixed it.

There's also a new mod out on NexusMods where some guys can help you roll it back to basically 1.31 core files to unbreak anything that 1.32 patch broke.

25 мар. 2019 в 2:42 Literally the wrong key. I thought it was the tilde (

), meanwhile it was just ( ` ) instead.

7 июл. 2019 в 14:09

sorry to necro this but I am having the exact same problem rn, i have some mods installed via nmm on v1.32

i have tried all the regular keys, i am using a qwerty keyboard idk wtf gives, i edited the ini file properly. its also a fresh install

7 июл. 2019 в 14:27

Ok so for future reference weather you are running windows 10 or 7 you need to edit two files not just one.

First, open the "general.ini" file located under
C:\Program Files (x86)\Steam\steamapps\common\The Witcher 3\bin\config (if you have your steam library in the default location), otherwise just right click on the game in your steam library UI and hit properties and go to the local files tab and click brows locals files and go from there.

put these two lines in under [General]
ConfigVersion=2
DBGConsoleOn=true

THEN you need to go to C:\Users\(your user folder)\Documents and open the "user.settings" file located there and look for the [General] line and add the same two lines under it if they are not already there and you will have a functioning console without adding a mod that can possibly interfere with other mods.

I hope this helps other people that have run into my issue where the console doesn't work after just editing the general.ini file.

7 июл. 2019 в 14:42

Ok so for future reference weather you are running windows 10 or 7 you need to edit two files not just one.

First, open the "general.ini" file located under
C:\Program Files (x86)\Steam\steamapps\common\The Witcher 3\bin\config (if you have your steam library in the default location), otherwise just right click on the game in your steam library UI and hit properties and go to the local files tab and click brows locals files and go from there.

put these two lines in under [General]
ConfigVersion=2
DBGConsoleOn=true

Почему не открывается консоль в ведьмак 3





Первым делом откройте папку с игрой.

В моём случае это будет выглядеть вот так: "Этот компьютер > Локальный диск (D:) > Steam > steamapps > common > The Witcher 3".

После этого ищем папку "bin" и открываем её.
Далее нужно открыть папку "config".
В папке конфиг ищем папку "base".
Тепер в этой папке "base" мы должны найти файл "general" (или же general.ui).

Открываем этот файл и вводим в него этот текст: DBGConsoleOn=true
Сохраняем.

Теперь мы запускаем игру и заходим в неё (главное зайти именно в игру, а не сидеть в меню).

Нажимаем на клавишу "ё"

А вот и сама консоль:

Если у вас не получилось открыть консоль через команду, тогда вам нужно будет скачать для этого специальный мод

Основная проблема консоли, это то, что она может сломать игру впринципе. Например, ввод многих команд, или же злоупотребление ими.

Представляю вашему вниманию вот этот видеоролик, который наглядно показывает "сломанную игру"

Witcher 3: Wild Hunt "Debug Console Enabler последняя версия"


Этот плагин является простым .dll файлом, который включает консольную отладку в игре Ведьмак 3, проще говоря, будет доступна консоль, для ввода консольных команд.

Последняя версия включает поддержку игры версий: 1,24, 1,30, 1,31 и GOTY

Архив содержит версию утилиты со свободной камерой.

Общее:
1. Включение консоли "F2" или тильда

2. Режим свободной камеры "F1"

Примеры команд:
replaceplayer ('Ciri') - сменить Геральта на Цири, или на другую персону, введите нужное имя например
addmoney (11) - добавить деньги, можно поэкспериментировать с цифрой в скобках
removemoney (11) - удалить деньги, можно экспериментировать с цифрой в скобках
eatapple () - съесть яблоко
god () - разные варианты режима бога
god2 () - разные варианты режима бога
god3 () - разные варианты режима бога
testpause () - включить паузу
testunpause () - выключить паузу
addexp (1000) - получить опыт, значение в скобках меняется
setlevel (5) - сделать указанный уровень герою
addskillpoints (2) - добавить очков навыков, значение в скобках меняется
winGwint (true) - победить в Гвинт
killall (50) - убить врагов в указанном радиусе
makeitrain - включить дождь
stoprain - выключить дождь
xy (posX,posY) - телепортироваться по нужным координатам. posX и posY меняем на координаты по вертикали и горизонтали. Включаем режим бога, так как в некоторых точках карты Геральт может упасть с большой высоты
shave () - побриться
healme () - восстановить здоровье
secretgwint () - запускает партию в Гвинт
additem ('название предмета', 1) - добавить вещь

Почему не открывается консоль в ведьмак 3

10 сен. 2016 в 17:35


1

There is a way to enable the debug console without actually downloading (and waiting) for a debug mod.

The Witcher 3 Wild Hunt\bin\config\base directory

open the General.ini file and copy-paste the following under the [General] line :

DBGConsoleOn=true

Save the file and you're done.

Thanks to Slater3611 who originally left a lot of these instructions on the Nexus.

Читайте также: