Fanaleds для euro truck simulator 2 как настроить

Обновлено: 04.07.2024

Post by pete_agreatguy » 29 Jan 2018, 14:51

UPDATED: 15th June 2021.

An account is not required to download the files below but it is recommended!

REASON: If you wish to be notified about updates, then please subscribe to this thread (after creating an account and setting up your notification options).

Profile sets for Euro Truck Simulator 2 and American Truck Simulator by SCS Software.

1) I setup the LEDs based upon ECO driving! Therefore you are instructed to change gear (red lights flashing) when the engine revs are approaching the end of the "green zone".

2) These are all set for a 12 speed (ETS2) or 18 speed (ATS) gearbox. If you use a different gearbox, you need to edit the profile so it meets the X speed gearbox you use (e.g. 6 for ETS2 or 13 for ATS). You do not need to change the led rev values, just the amount of gears.

Download the profile files attached to your Fanaleds profiles folder:
"C:\Users\[username]\AppData\Roaming\FanaLEDs" (Windows 7, 8, 8.1 and 10).

Remember to show hidden files and folders otherwise the above folder will not be there

Any issues or suggestions, please reply below

15th June 2021: Added DAF XG and XG Plus for ETS2.

6th Dec 2020: Added Freightliner Cascadia for ATS.

1st Nov 2020: Added Western Star for ATS.

20th May 2020: Added LoneStar and Mack. Tweaked VNL (for ATS).

15th May 2020: Added the Renault T range for ETS2

11th Feb 2019: Added the VNL truck for ATS & the MAN Euro 6 truck to ETS2. Also, I spent 2 hours re-tweaking all trucks for both ETS2 and ATS!

5th April 2018: Updated ETS2 to include all trucks (to date). Tweaked all of them!

[HOW TO] Logitech G27 RPM Leds with FanaLEDS (Working)

KylixMynxAltoLAG Posts: 3 Joined: 10 Jul 2013 05:06 Location: Buenos Aires, República Argentina

[HOW TO] Logitech G27 RPM Leds with FanaLEDS (Working)

Hello Euro Truck Drivers, here i give you the steps to make the Logitech G27 RPM Leds work with ETS2 via FanaLEDS Software.

Please note: Versión v1.4.1 of ETS2 is Required for this to work due to it's new Telemetry Info Output.
If you have the retail version of ETS2, go here to download the update: http://www.eurotrucksimulator2.com/update.php
If you have the Steam versión, right-click in the game, select Properties, select Betas tab, then select "temporary141 - Temporary 1.4.1 for early Access. " from the dropdown menú and select close to begin update (This is temporary until the update will be released in Steam).

Ok, now that you have ETS2 v1.4.1 Installed and working, follow this simple steps.

2) Once FanaLEDs is installed, go to the installation folder (ex: C:\Program Files (x86)\FanaLEDs), and there is a folder with the name "additional" (these are the plugins needed for games to talk with the software). We need the ones for ETS2, so we enter in the folder "ETS2 Plugin". Here is a file with the name "FanaLEDsPluginETS2.dll"

3) Copy the file "FanaLEDsPluginETS2.dll" into the ETS2 game installation folder to this especific location:
Retail: C:\Program Files (x86)\Euro Truck Simulator 2\bin\win_x86\plugins
Steam: C:\Program Files (x86)\Steam\SteamApps\common\Euro Truck Simulator 2\bin\win_x86\plugins
You will recieve an information dialog when running ETS2 about the existance of this plugins to know if you have installed it correctly. Now the ETS2 will load that plugin and will "talk" with the FanaLEDS software.
Note: Use your common sense to get to this folders. The folder "plugins" doesn't exists by default, so just create it.

4) Start the FanaLEDs software and in the main window, select "Euro Truck Simulator 2" from the "Active profile" dropdown menu. Leave the software opened, you can minimize that window.

5) Start ETS2, accept the dialog about "aditional software detected" and that's it.

Live for Speed

Make sure your Live for Speed copy is up to date (0.6B)
Open cfg.txt in your main Live for Speed folder (where the LFS.exe is)
Find the line that says "OutGauge Mode" and change the number behind it to a 1 or 2.
Change your OutGauge port to 30000 Save and exit the file.
Open LFS.exe and press "/". Directly after that type "insim=29999" so you get /insim=29999

Assetto Corsa

Users of Fanatec wheels should disable the native LED support. Go to the settings in-game and search for the "FANATEC LEDS" option and set it to "DISABLED". This way the game does not interfere with Fanaleds.

Assetto Corsa Competizione

For version 1.5.2 of the game open the controls.json file located in this folder: %userprofile%\Documents\Assetto Corsa Competizione\Config\
Change the value for the option 'enableManufacturerExtras' to 'false'. The default value is set to 'true'.

F1 2020

Available since FanaLEDs v2.5x

In order to make F1 2020 work, make sure the following options are set:

D-BOX: Off
Fanatec LED: Off
SLI Pro LED: Off
UDP Telemetry: On
UDP Broadcast Mode: Off
UDP IP Address: 127.0.0.1
UDP Port: 30500
UDP Send Rate: 60Hz (slower rates also work)
UDP Format: 2020

Advanced users can also use different settings, just make sure to mirror the IP and PORT settings with your FanaLEDs OutSim variables.

D-BOX: Off
Fanatec LED: Off
SLI Pro LED: Off
UDP Telemetry: On
UDP Broadcast Mode: On
UDP IP Address: 0.0.0.0
UDP Port: 32190
UDP Send Rate: 30Hz
UDP Format: 2020

SCS Software

Codemasters (DiRT, F1, GRID)

Open "hardware_settings_config.xml" which is located in your savegame folder of the game. For instance: C:\Users\your username\Documents\My Games\DiRT3\hardwaresettings
Open this file and look for a line that begins with:
<motion enabled
Replace this line with:
<motion enabled="true" ip="127.0.0.1" port="30500" delay="1" extradata="3" />
Add this line to cancel interference from native support:
<led_display nativeSupport="false" fanatecNativeSupport="false" />

iRacing

Turn off the native Fanatec and Logitech LED Support in the options menu to cancel interference from iRacing.

F1 2018

In order to make F1 2018 work, make sure the following options are set:

D-BOX: Off
Fanatec LED: Off
SLI Pro LED: Off
UDP Telemetry: On
UDP Broadcast Mode: Off
UDP IP Address: 127.0.0.1
UDP Port: 30500
UDP Send Rate: 60Hz
UDP Format: Legacy

Automobilista 2

Go to 'options' and select 'SYSTEM'.
Find the 'Shared Memory' setting, and set it to 'Project CARS 2'.
The UDP settings shouldn't be altered and are not neccecary for Fanaleds to function.

rFactor 2

Before playing you need to install the rFactor plugin. This file should be located in the "additional\rFactor2 plugin" folder in the Fanaleds installation path.
Copy the "FanaLEDsPlugin.dll" file to your "rFactor2\bin32\Plugins" folder. Example: D:\rFactor2\bin32\Plugins
For x64, Copy the "FanaLEDsPlugin_x64.dll" file to your "rFactor2\bin64\Plugins" folder. Example: D:\rFactor2\bin64\Plugins

Navigate to "rFactor2\UserData\Controller\ClubSport Wheel.ini" and look for these two lines:

Use Additional Hardware Features="1" // Whether to use additional hardware features like steering wheel LEDs
Hardware 3Digit Display="1" // If hardware has 3-digit display, 0=off, 1=gear, 2=speed

If you change the "1" values to "0", native support will no longer be enabled so it does not interfere with Fanaleds.

Note: If you're using a custom profile, edit the corresponding .ini file!

rFactor PRO

Before playing you need to install the rFactor plugin. This file should be located in the "additional\rFactor Pro plugin" folder in the Fanaleds installation path.
Copy the "FanaLEDsPlugin.dll" file to your "rFactorPro\bin32\Plugins" folder. Example: D:\rFactorPro\bin32\Plugins
For x64, Copy the "FanaLEDsPlugin_x64.dll" file to your "rFactorPro\bin64\Plugins" folder. Example: D:\rFactorPro\bin64\Plugins

Navigate to "rFactorPro\UserData\Controller\ClubSport Wheel.ini" and look for these two lines:

Use Additional Hardware Features="1" // Whether to use additional hardware features like steering wheel LEDs
Hardware 3Digit Display="1" // If hardware has 3-digit display, 0=off, 1=gear, 2=speed

If you change the "1" values to "0", native support will no longer be enabled so it does not interfere with Fanaleds.

Note: If you're using a custom profile, edit the corresponding .ini file!

Forza Horizon 4 / Motorsport 7

If you play Forza Horizon 4 and Motorsport 7 from the Microsoft Store you will most likely need to apply a little configuration before you can use Fanaleds. Microsoft Store games (UWP) use a protection that prevents UDP data from being fetched on the same device.

Open the app and search for 'Forza Horizon 4' or 'Forza Motorsport 7' in the 'DisplayName' column.
Tick the box in front of the game and press the 'Save Changes' button.

If you get an error while saving there is something corrupt in Windows. Only a reinstall will fix that.

No errors? Good, let's continue.

Open the game and go to settings, HUD and Gameplay, and scroll down.
Enable the 'Data out' option
Set the 'Data out IP address' to '127.0.0.1'
Set the 'Data out IP port' to the same value as in Fanaleds. The default port is 30500.

You are now ready to play!

Fanaleds для euro truck simulator 2 как настроить

11 июл. 2013 в 23:58 [HOW TO] Logitech G27 RPM Leds with FanaLEDS (Working)

Hello Euro Truck Drivers, here i give you the steps to make the Logitech G27 RPM Leds work with ETS2 via FanaLEDS Software.

Ok, now that you have ETS2 v1.4.1 Installed and working, follow this simple steps.

4) Start the FanaLEDs software and in the main window, select "Euro Truck Simulator 2" from the "Active profile" dropdown menu. Leave the software opened, you can minimize that window.

5) Start ETS2, accept the dialog about "aditional software detected" and that's it.

Fanaleds Readme

Fanaleds is able to automatically configure games for you. In Fanaleds, press "help" and then press "Setup games automatically". Select a drive or folder where you have games installed and Fanaleds will setup all games for you.

If you want to do it the old way, you can do it manually.
For an overview of features per game we would like to refer to this page.

F1 2015, 2016, 2017

Open "hardware_settings_config.xml" which is located in your savegame folder of the game. For instance: C:\Users\your username\Documents\My Games\F1 2016\hardwaresettings
Look for the line that starts with "<udp0 enabled"
Replace this line with:
<udp0 enabled="true" ip="127.0.0.1" port="30500" />
Also look for the line that starts with "<led_display fanatecNativeSupport"
Replace this line with:
<led_display fanatecNativeSupport="false" sliProNativeSupport="false" />

BeamNG.drive

Open "game-settings.ini" which is located in the following folder: C:\Users\your username\Documents\BeamNG.drive\settings
Look for the line that starts with "outgaugeEnabled"
Change the value from "false" to "true"
Make sure the "outgaugePort" value from BeamNG.drive matches the one in Fanaleds. The default value is "4444".

OMSI - Der Omnibussimulator

Copy the "FanaLEDs.dll" and "FanaLEDs.opl" file from the "additional\Omnibus Simulator" folder in the Fanaleds installation folder.
Paste the two files in the plugins folder in the installation folder for OMSI. Example: D:\OMSI\plugins

In order to get the RevLEDs working in Live for Speed you will need a custom profile. Download one here.

American Truck Simulator / Euro Truck Simulator 2

Copy the "FanaLEDsPluginETS2.dll" plugin from the "additional\ETS2 Plugin" folder in the Fanaleds installation folder.
Paste this file in the "bin\win_x86\plugins" folder in the Euro Truck Simulator 2 installation folder. Example: D:\Euro Truck Simulator 2\bin\win_x86\plugins.
If the plugins folder does not yet exists, create it.
If you're using the x64 version of the game also make sure to copy that version of the plugin!

Project C.A.R.S.

Enable the shared memory option under "Options > Gameplay > Use Shared Memory"
After you have enabled the shared memory, you have to disable the native support to cancel interference. Go to "Options>Controls>Configure>RPM/Gear Display", and disable it.

F1 2019

Available since FanaLEDs v2.5q

In order to make F1 2019 work, make sure the following options are set:

D-BOX: Off
Fanatec LED: Off
SLI Pro LED: Off
UDP Telemetry: On
UDP Broadcast Mode: Off
UDP IP Address: 127.0.0.1
UDP Port: 30500
UDP Send Rate: 60Hz (slower rates also work)
UDP Format: 2019

Advanced users can also use different settings, just make sure to mirror the IP and PORT settings with your FanaLEDs OutSim variables.

D-BOX: Off
Fanatec LED: Off
SLI Pro LED: Off
UDP Telemetry: On
UDP Broadcast Mode: On
UDP IP Address: 0.0.0.0
UDP Port: 32190
UDP Send Rate: 30Hz
UDP Format: 2019

Project CARS 2

Go the the 'SYSTEM' settings in the game.

Find the 'Shared Memory' option, and select 'Project CARS 2'.

If you're using a Fanatec wheel you will have to disable the native support from the game to prevent interference. Go to the options screen, and select 'CONTROLS' and then 'Configuration'.

Find the 'RPM/Gear display' setting, and select 'No'.

You should now be ready to go!

Game Stock Car

Before playing you need to install the Game Stock Car plugin. This file should be located in the "additional\rFactor plugin" folder in the Fanaleds installation path.
Copy the "FanaLEDsPlugin.dll" file to your "Game Stock Car\Plugins" folder. Example: D:\Game Stock Car\Plugins

rFactor / Automobilista

Before playing you need to install the rFactor plugin. This file should be located in the "additional\rFactor plugin" folder in the Fanaleds installation path.
Copy the "FanaLEDsPlugin.dll" file to your "rFactor\Plugins" folder. Example: D:\rFactor\Plugins

Читайте также: