Как запустить battlefield 1942 на windows 10

Обновлено: 04.07.2024

Для игры на Windows 10 необходимо произвести следующие действия в системе: Заходим в Панель управления-программы и компоненты-Включение или отключение компонентов Windows - Компоненты прежних версий (поставить галочку напротив DirectPlay). Потом зайти в свойства ярлыка игры и выставить режим запуска от имени администратора и режим совместимости с windows XPsp3.


Титульный экран из игры Sonic Blast / Соник Бласт

Все права на материал с сайта сохранены и принадлежат их авторам. Любое копирование текста с сайта должно сопровождаться прямой активной ссылкой на наш сайт. Все игры (в том числе и онлайн), эмуляторы, и другие программы и материалы, предоставляются на некоммерческой основе (бесплатно) игры скачанные с этого сайта, носят ознакомительный характер и после ознакомления должны быть удалены. Некоторые материалы доступны на картриджах и других легальных носителях, поэтому могут быть приобретены для частного использования.

Accepted Solution

WHY doesnt BATTLEFIELD 1942 work with windows 10 It worked when i had windows 7 everytime i try start it i just hear a pling but no boot up and it acts as if its about to start but no loading screens or anything the screen just blinks and goes back to desktop PLEASE HELP me EA i really want to play this classic again

here are my specs


  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

November 2017 - last edited December 2017

ok cool very easy to fix

1 you need the gamespy patch

your bf1942 will work after all this

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

November 2017 - last edited November 2017

what version of bf1942 do you have cd rom or origin ?

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend
@emile44 wrote:

what version of bf1942 do you have cd rom or origin ?

i have it on ORIGIN


  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

November 2017 - last edited December 2017

ok cool very easy to fix

1 you need the gamespy patch

your bf1942 will work after all this

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

thanks it worked and i didnt even have to disable win defender for Direct play! and i noticed the online worked again is it community hosted now or has EA allowed us to make it online?

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

its a community hosted fix have fun online again on bf1942 i my self play fhsw on bf1942

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

nice anyways i did encounter a bug now it doesnt let me join singleplayer or online without freezing on loadingscreen basicly when it sends me to loadingscreen it either sends me to a frozen main menu or i end up in desktop and when i do that i tryed to click on the game window but it doesnt let me stay in it the first error is what happens most tho

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

make sure compatibility mode windows xp sp3 is set on administrator

i have not run across a bug like this

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

November 2017 - last edited November 2017

@emile44 wrote:

make sure compatibility mode windows xp sp3 is set on administrator

i have not run across a bug like this

i checked and it was already in win XP compatablity mode and i will run a test now with all permissions added in administration mode

i tested it and even with the patch installed INSTANT ACTION for singleplayer STILL doesnt work i doubt its because of WIN defender on cause ive given this game every perimission i know of when i hit start it freezes in that menu and when i ran it without patch as far as i know it sent me to desktop and then after a few seconds of trying to click on the window the computer said i had to close the program

Accepted Solution

Just purchased the Anthology from Amazon and installed on a 64-bit system, set up on Windows 7 but "upgraded" to Windows 10 before the BF 1942 install. Won't launch - big surprise? Set the exe file to run under XP Service Pack 3 mode, but no go . Any help?


  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

August 2016 - last edited a week ago

and your bf1942 will work again

and yes ea will not make a no cd patch for bf1942 they drop support over 2 years ago

hell they not even keep the master server up ;(

if ax server not made the new master server for BF1942

it be dead now

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Mine problem is with the dlcs 'cuz i have both versions of the game (origin and CDs)but the origin version doesn't include the dlcs (unhappily). I installed the version over the CD version and it works but it doesn't include the dlcs. Still looking for an answer for it. Tried to contacted an advisor but the result were negative . If you are wondering how i got the origin version of the game i just redeemed the code in the origin and it worked (it was a few months ago so i really don't know if it is gonna work but is worth the risk) and download it after installing the CD version. I just hope that EA creates digital copies of the dlcs and others old legacy games. obs: sorry for my English.

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

I have the same problem but, the download demo runs fine on win 10. EA (or anybody) please explain

  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Two things I have found however,

1. I tried to be smart and copied a previous profile from my old Windows 7 computer. This caused me to get a black screen when I tried to start any server connection. The game itself would start, but any server (MAP) connection would go black screen, play music and lock the computer. The only way to recover was ALT-CTL-DEL , user log out and restart. If I used the DEFAULT PLAYER profile I had no problem, only when I attempted to used the copied profile. I deleted the copied profile, recreated a new profile and had no further problem.

2. I started playing with the resolution in the "video" settings in hopes of increasing the resolution to match my laptops settings. This proved problematic and could result in the game locking up when using the ESC key to exit. instead of returning to the server screen.


А далее правильно все сделать !
1)Пропатчить (во избежании проблем ехе фаил игры сохранить )
2) Затем распаковать архив в какую нить папку
3)перетащить первые 3 файла
а) dm-bf1942v1.45.18_nocd
в)BF1942
с)BForig
подтвердить изменения (заменить все)
4)открываем папку Modsbf1942 копируем mod.dll и
ложим его в C. Gamesbf1942Modsbf1942 подтверждаем замену
5) открываем папку XPack1 копируем от туда mod.dll
и ложим в C. Gamesbf1942Patch DataXPack1 подверждаем замену
6) если в C. Gamesbf1942Patch Data есть папка XPack2 то также из C. BF1942v1.45.18NOCDModsXPack2
копируем mod.dll и ложим соответственно в
C. Gamesbf1942Patch Data XPack2 подтверждаем замену

Делаем Рестарт компа и вперед.

PS Во избежании каких либо проблемм следует заранее скопировать все заменяемые файлы
патч 1.45.18 прекрасно ставиться на 1.3

Патч оригинальный встанет даже на хакнутую игру (англ.) но потом игра будет требовать CDKey

Читайте также: