Arma 3 ошибка 0x00000035
Обновлено: 06.07.2024
Contents
Report the error to the Feedback Tracker
If you encounter an error that you cannot solve by yourself, please report it to our [1],_or_contact_our_support team. Together with the error code, please attach an error report. See this guide for more information on how to do so.
Процессор amd fc 4300
видеокарта geforce gtx 750
12 гб оперативки
64 битная винда естественно.
запускается арма из исходных файлов,но лаунчер не работает и тут и через стим.
Доктор, и с модами и без
Вылетает такая ошибка
Я переместил папку Steam в Program files ( до этого была в Progrsm files(x86))
Меньше стала вылазить эта ошибка
Но все равно она есть
Купил сегодня Арма 3, до этого играл в 2 ОА
Загрузил, установил и включил
Быстро прошёл обучение и решил поиграть в мультиплеер
Но не могу играть на серверах из за того что захожу на любые сервера и меня либо сразу либо через пару минут выгоняют
Всплывает окошко "вас изгнали с сервера" и все, ставил исключение в брандмауре все компоненты армы, проверял целостность Кеша но все равно проблема та же
Подскажите пожалуйста, как решить?
Мирас, у вас либо порты закрыты, либо айпи динамический, эти две проблемы преодолевает хамачи
Алексей, Хамачи бывает глючит и у одного в одной игре работает у другого нет. И т.д., если не работает Хамачи хост через себя, пускай твой друг захостить попробует. ( Есть ещё вариант через брандмауэр открыть входящие и исходящие подключения самому Хамачу)
Илья, спасибо, капитан очевидность. Я это в первую очередь сделал. Но проблема уже не актуальна, спасибо.
Алексей, Ты про друга хоста или брандмауэр ( тут, как ты можешь видеть сверху, много людей, которые банальнейших вещей сделать не могут)
Алексей, Нормальные люди перед тем как писать в профильное сообщество сначала ошибку гуглят, если бы этот товарищ поступил по-совести, то в первой же ссылке нашёл бы решение проблемы
Можете подсказать, пойдет ли игра при таком железе ?
GeForce GT 640
Intel(R) Pentium(R) CPU G3220 @ 3.00GHz
4,00ГБ ОЗУ
1920х1080, 60Гц
RAM 3.95GB
Win7
64бит
Парни, чисто технический вопрос по игре. Решил поиграть в алтис лайф на данном сервере, установил игру и моды. Выдает ошибку : "Поставщик облачного файла не работает" а после выдает ошибку 0x0000DEAD -
Есть решение, и вообще с чем это связанно?
Помогите, когда захожу на любой сервер, то отключается интернет, на минут 7, была до этого винда 8.1 все норм было, поставил 10 и такая фигня, помогите
Мужики помогите требуется помощь в сфере Армы, не знаю к кому ещё обратиться, решил сыграть на проекте, а при заходе выдаёт ошибку "Out Off Memory" Как бы понятно что нехватка памяти идёт, но где эту самую память так сказать настраивать?
Руслан, не знаю, актуально ли, но вот:
-malloc=system (винда сама будет решать кому и сколько и в каком темпе)
Извините,можете помочь?У меня нет карты алтис,типо совсем,просто светло серая жижа в которой персонаж плавает
Народ, хелп плиз. Я сделал карту, она еще голая, добавил в terrain builder дороги, в бульдозере они отобразились, экспортирую в арму, не отображаются. В чем причина?
Всем привет, такая проблема.
Арма 3 лицензия стим, просто перестала работать, полное удаление и переустановка не помогла.
Все что происходит, это запуска лаучера.
После нажатия "Играть" Лаучер закрывается, игра вообще не запускается и в процессах ее нет.
(Ну и значек в стиме пишет сразу просто "В сети")
+ Я не один такой столкнулся с данной проблемой, писал товарищам, который постоянно в стиме мелькали "Онлайн потом Арма 3" мол спросил, говорят что такая же байда
Arma 3
28 мар. 2017 в 20:41 27 сен. 2017 в 5:47One of the possible reasons for this message is running Steam as an administrator and starting Launcher as a regular user. If this situation occurs, Launcher may display a "Updates unavailable - Steam is not running" message in its status.
Possible solutions:
Run the game from Steam client by clicking on the Play button (not from a shortcut nor directly from an executable).
Exit Steam and run as a regular user (instead of running it as an administrator).
Run the game or the Launcher from a shortcut or from an executable as an administrator.
Restart Steam.
Restart the computer.
1.42 An “Unusual process exit” message is displayed by Arma 3 Launcher whenever it detects that the game was not closed correctly. That may mean that the Operating System (OS) was unable to start the game or that the game has crashed.
The exit code in the message is a number provided by the OS and it may be ambiguous. However, it still may provide a clue about what the issue is and how to solve it.
If you need to, you can copy the message by pressing Ctrl + C while it is displayed, and then paste it to the Feedback Tracker or another channel by pressing Ctrl + V.Common exit codes
Here’s a short list of common exit codes:
0xC0000022 - STATUS_ACCESS_DENIED
This code means the OS doesn’t have access to some files required to run the game. Possible solution:
0xC0000135 - STATUS_DLL_NOT_FOUND
The OS is unable to load a file that is required to run the game. A missing DLL may belong to the game, the OS or one of the required components (DirectX e.g.). Possible solutions:
- Verify the integrity of the game cache using Steam.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
- Run the Windows System File Check tool to repair corrupted system files.
- To identify the precise DLL that is causing an issue.
- Download a 64-bit version of the Microsoft Dependency Walker and open arma3_x64.exe with it. The libraries with a red icon are the corrupted ones.
- Download a 32-bit version of the Microsoft Dependency Walker and open arma3.exe with it. The libraries with a red icon are the corrupted ones.
0x00000035 - ERROR_BAD_NETPATH
One of the possible reasons for this message is running Steam as an administrator and starting Launcher as a regular user. If this situation occurs, Launcher may display a "Updates unavailable - Steam is not running" message in its status.
- Run the game from Steam client by clicking on the Play button (not from a shortcut nor directly from an executable).
- Exit Steam and run as a regular user (instead of running it as an administrator).
- Run the game or the Launcher from a shortcut or from an executable as an administrator.
- Restart Steam.
- Restart the computer.
0x406D1388 - MS_VC_EXCEPTION
This error may be caused by a registry override (a hack) that forces Arma 3 to utilize Large-Page memory. This type of hack was previously used by Fred41’s custom allocator, but it may cause issues on some computers. Possible solution: In the Windows registry, locate the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\arma3.exe and check the value of attribute UseLargePages. If the value is 1 then set it to 0 or remove it entirely.
0xC0000005 - ACCESS_VIOLATION
Can also be STATUS_ACCESS_VIOLATION.
This error is very generic. It may be caused by many issues, such as a hardware malfunction, a virus in the computer, but also an error in the game itself. Possible solutions:
- Try changing the Memory Allocator you are using (default: "tbb4malloc_bi" - try "system" on Windows 7 and later)
- Try joining another server, then rejoin the previous one.
- Update the graphics card drivers to a newer version.
- Rollback the graphics card drivers to an older version.
- Check the temperature of your GPUs and CPUs.
- Verify the integrity of the game cache using Steam.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
- Run a Windows System File Check tool to repair corrupted system files.
0x00000001 – UNABLE_TO_INIT_DXGI
The game is unable to initialize a graphical subsystem. One of possible reasons is ALT TABbing while the game is launching. Possible solutions:
- Update the graphics card drivers to a newer version.
- Rollback the graphics card drivers to an older version.
- Check the temperature of your GPUs and CPUs.
- Disable the Steam Overlay.
0xC000007B - STATUS_INVALID_IMAGE_FORMAT
These errors are usually raised when some DLLs are corrupted or missing or when they are replaced with an incompatible version. It may also happen that you placed a DLL file in the game folder that is loaded instead of the genuine one. Possible solutions:
- Verify the integrity of the game cache using Steam.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
- Run the Windows System File Check tool to repair corrupted system files.
- If you are using post-processing tools like Reshade or SweetFX or utilities like RadeonPro remove them.
- Re-install the game; remove all files from the game installation folder and then verify the integrity of the game cache using Steam.
- To identify the precise DLL that is causing an issue.
- Download a 64-bit version of the Microsoft Dependency Walker and open arma3_x64.exe with it. The libraries with a red icon are the corrupted ones.
- Download a 32-bit version of the Microsoft Dependency Walker and open arma3.exe with it. The libraries with a red icon are the corrupted ones.
0xC0000139 - STATUS_ENTRYPOINT_NOT_FOUND
0xC000007A - STATUS_PROCEDURE_NOT_FOUND
0xC000012F - STATUS_INVALID_IMAGE_NOT_MZ
These errors are raised when the EXE or DLLs, either in the game folder or in the system folders, are corrupted. Possible solutions:
- Verify the integrity of the game cache using Steam.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
- Run the Windows System File Check tool to repair corrupted system files.
- To identify the precise DLL that is causing an issue.
- Download a 64-bit version of the Microsoft Dependency Walker and open arma3_x64.exe with it. The libraries with a red icon are the corrupted ones.
- Download a 32-bit version of the Microsoft Dependency Walker and open arma3.exe with it. The libraries with a red icon are the corrupted ones.
0xCFFFFFFF - APPLICATION_HUNG
The application became unresponsive and was terminated by the OS.
0xC000009A - STATUS_INSUFFICIENT_RESOURCES
This error may occur when you have an obsolete version of the BattlEye anti-cheat software or after an upgrade to Windows 10.
- Read a section dedicated to this error on BattlEye FAQ page.
- Update the BattlEye anti-cheat software or contact BattlEye support.
- If you encountered this problem after the upgrade to Windows 10, some system or shared files might get lost in the upgrade.
- Re-install DirectX.
- Uninstall the Visual C++ 2013 Redistributable package (both x86 and x64 version), restart your computer and install the package again (do not use the Repair function).
0xC06D007E - ERROR_MOD_NOT_FOUND
The specified module could not be found in loaded dynamic library. The reason that the DLL could not be loaded is most often that it needs to load other DLL's it depends on to do its work. (note: this has nothing to do with game mods, MOD in this case means module).
0xC000041D - STATUS_FATAL_USER_CALLBACK_EXCEPTION
There is a multiple reasons for this error:
- Close all unnecessary applications.
- Un-install 3rd party applications that could interfere with the game (performance boosters, streaming apps, FPS indicators, overlays, graphics enhancers) or disable them.
Читайте также: